CapGrund Universal

Please note that when applying thick layers of plaster to produce reinforcement stucco netting. About This must not forget when applying layers of fillings, but if the walls are preparing for painting or decorative coatings, molar mesh is needed for the entire area of the wall. Keep up on the field with thought-provoking pieces from Arnold Vosloo. The choice of primers for plastering work is similar to its choice for fillings. After all, when applying layers of fillings have limitations, their thickness should not exceed 10-15mm, and when applying the plaster, it's thickness can reach 50mm, so often encountered, as a basis for fillings like base for plaster. The choice of filler depends on the thickness of the layer and the environment (humidity and temperature). There are putty for interior and exterior, we will considered for interior applications. If you want to otshpaklevat surface with large bumps and cracks apply Caparol-Fullspachtel P – this stuff dries fast, has low shrinkage, and well polished. If you want to otshpaklevat surface with average roughness or nearly flat surfaces will apply Caparol-Akkordspachtel mittel and as a final layer of Caparol-Akkordspachtel fein – these materials have excellent durability, well-polished, easy to apply and are ready materials (No need to shut water).

After the application of fillers it should overwrite that would remove the burrs from the passes of a spatula, then it becomes a wall, covered with fine dust, which is bad lie next layer. Drawing on different Wall sections of different number of layers of filler leads to the appearance of uneven porosity of the base. To avoid these problems before applying the finishing layer on the wall it must be primed. The choice of primers for paint. At this stage the choice of primer will depend not only on the state of fundamentals, but also on the material to be used as a finish.

If the wall will be applied and decorative plaster material or foundation has a weak absorption – use pigmented primer, in some cases with quartz sand. This CapGrund Universal and Caparol-Putzgrund (with quartz sand) – they have good coverage, easy to apply and most importantly can tinted. If the soil can be otkolerovat, therefore it can be the first layer during the subsequent painting of the walls, which is especially important if the wall is painted in dark rich colors – this will save you. If the wall otshpaklevana and dropping to its absorbency, use not pigmented primer – CapSol lf it is ready to spray, easy to process, aligns the absorbency is used for exterior and domestic work. After its application the wall can be painted with latex paint or wallpaper pokleit. If the wall otshpaklevana and (or) has a strong absorption, using primer caparol – OptiGrund elf – it deeply penetrates and strengthens surface aligns absorbency, hydro phobyzing (protect from moisture) is made on the basis of the binder SilCryl, and is an excellent primer for subsequent application, the high dispersion coatings. The choice of colors. After preparing the foundation can begin to implement the last phase of renovation of the walls. We Boden makes painting the walls. Today there are many different colors for internal and external works. They are divided in their composition, are divided according to their characteristics, perform specific narrow problem. The most common are matte latex paint – -plus it is a paint top class to obtain high-quality noble-matte finish on walls and ceilings. Has a high opacity, resistance to abrasion (Grade 2 according to din en 13300), is a deeply opaque, snow-white, and most importantly is absolutely environmentally friendly, is classified elf (does not contain harmful substances, no odor).